Automatic turnkey drinking water bottle filling system bottling production line
RO SYSTEM
RO process makes use of the spiral semi permeable membrane to remove soluble solids, organic matter, colloidal matter and bacteria in raw water. Raw water is sent to RO membrane that only the pure water can pass under a certain pressure. Then collect pure water. The impurities in raw water are concentrated and drained. RO membranes can remove more than 96% soluble solids, 99% organic matter and colloidal matter and almost 100% bacteria.
Mainly including precision filter, membrane case, RO membrane, high-pressure pump, flow meter, pressure meter, distribution box, control valve and others
Reverse Osmosis ( RO ) Water Treatment Plant, Ultrafiltration Water System,Brackish Water Purification System,Water Filter System,Water treatment Equipment,Water Desalination System,Water Purifying Solutions.
Reverse Osmosis water treatment machine/ Water Treatment Plant:
Multi-stage media filtration for pre-treatment, and RO unit for main filtration, polishing treatment of UV system and Ozone system.
Pre-treatment System
Mainly including raw water pump, quartz sand filter, activated carbon filter, resin filter, antiscale tank, high & low pressure protection switch, raw water pressure meter.
Solve the following problems mainly:
A. Prevent membrane scaling(including Fe3+,Fe2+,CaCO3,CaCO4,SrSO4,CaF2,SiO2,iron,aluminum oxide)
B. Prevent colloidal material and suspended solids particles polluting and blocking.
C. Prevent organic polluting and blocking.
D. Prevent microbial polluting and blocking.
E. Prevent destruction of RO membrane due to oxidation substances.
F. Maintain the stability of water output.
1).Multi-media filter
The multi-media filter is widely used in drinking water treatment to remove different types of particles, such as suspended solids (turbidity), colloidal compounds and etc, ensuring the filtered water's TDS is less than 5. This process will reduce the load on the back-end fine filters.
Diffuser
There is diffuser, installed in the filter. Their main function is to make the compressed air and the water distribute evenly during backwash and water distribution.
2) Active carbon filter
The active carbon filter is the key device, commonly used for removal of organic substance and heavy metal element, suspended solids, residual chlorine and etc. It can effectively reduce the level of COD and improve the taste of water. The system is a pressure filter. In the filter, the quartz and Coconut shell activecarbon bed are employed. The activated carbon is equipped with vent valving at the highest point and adrain connection at the lowest point. The internal systems and components for each tank is constructed of frp material.
3) Security filter ( Cartridge Filters)
The security filter is most commonly used for treat water. The whole system adopts one set of stainless filter. There are 5 pieces of polypropylene in every 5μ Filter cartridges, filtering the vast majority of particles in the water, which eases the load of RO membrane. This process of filtration benefits to the filter cartridge and prolongs its lifetime in the system.
This apparatus contains filtration component and stainless support layers. The support layer is made of stainless steel 304, with the advantages of compact structure, beautiful shape, high flux, good filtration accuracy and etc. This apparatus is fitted with air drain valve and bottom air drain valve and side drain valve.
4) Reverse Osmosis Modules( RO)
RO system is key part for the water treatment system, which is widely used to make the pure water and drinking water. RO membrane removes many types of large molecules and ions from solutions by applying pressure to the solution when it is on one side of a selective membrane. The result is that the solute such as iron, Virus, bacteria and solids is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side.
5) Piping, Valves & Fittings
The pipe, valves and fittings (including tubing) ball valves, butterfly valves, piping used to the system is SS304. Reverse Osmosis Modules is equipped with sample valve for the convenience to check the product water.
6) Control devices
The whole automatic production line is achieved through the converter and PLC programmer and data collector such as the liquid lever sensor, flow sensor and etc. The whole production line is monitored by remote computer. When the water level of the product water tank is high, the system will stop automatically. When the water level of the product water tank is low, the system will run automatically.
Washing-filling-capping 3-in-1 unit filling machine
pet washing/filling/capping 3-in-1 unnit machine. Whole machine clamp bottle bottle neck transport, steadily conveyor reliable, deduce machine stop failure, just need exchange very few exchange parts, can apply to multi-kind bottle type productyion requirement, ecliminate to abrasion to bottle body, steadily transport. Filling method is micro grative type filling, en-heighten filling speed, filling precision and production capacity. Capping method adopt to France import that is catch cap, then capping. It is special for pure water filling, whole fracture is new design, strong application, safe reliable manipulation, high auto degree.
Summary
(1) This Mineral Water Bottling Plant is mainly used for washing, filling and capping PET bottle which can fill non- carbonated drinks such as mineral water, pure water, wine and so on.
(2) Bottle washing, filling and capping are achieved in one machine.
(3) The contact time is shorten between material and the outside. And improved the health conditions, production capacity and economic benefits.
(4) CGF series Mineral Water Bottling Plant adopts hanging type conveying-bottle structure to make changing bottle mold more convenient, faster and more laborsaving.
(5) The main machine adopts advanced PLC control technology. The key electric elements adopt Mitsubishi, Omron, Siemens, etc international famous products.
Parameter:
Summary
(1) This Mineral Water Bottling Plant is mainly used for washing, filling and capping PET bottle which can fill non- carbonated drinks such as mineral water, pure water, wine and so on.
(2) Bottle washing, filling and capping are achieved in one machine.
(3) The contact time is shorten between material and the outside. And improved the health conditions, production capacity and economic benefits.
(4) CGF series Mineral Water Bottling Plant adopts hanging type conveying-bottle structure to make changing bottle mold more convenient, faster and more laborsaving.
(5) The main machine adopts advanced PLC control technology. The key electric elements adopt Mitsubishi, Omron, Siemens, etc international famous products.
Our workshop
After sale service
1. Welcome to consult us for offer and technical solution:
2. free design workshop layout as workshop space.
3. free check raw material quality report to match suit water treatment system.
4. Engineer install and train client how to use and maintain machine
5. one year guarantee
6. if some client urgently need machine, we can ship machine half month under supply caps and bottle samples to meet with client quick need.
Some basic details need buyer support:
1. bottle and cap samples
2. workshop space length and width size
3. source water quality report
4. capacity requirement, we will match solution as it. we have capacity from 1000bph to 24000bph
5. and other details need check
6. for more,can talk us 86-13739169728
We also supply Raw material required for filling line required:
preform&cap &label&PE film
RO SYSTEM
RO process makes use of the spiral semi permeable membrane to remove soluble solids, organic matter, colloidal matter and bacteria in raw water. Raw water is sent to RO membrane that only the pure water can pass under a certain pressure. Then collect pure water. The impurities in raw water are concentrated and drained. RO membranes can remove more than 96% soluble solids, 99% organic matter and colloidal matter and almost 100% bacteria.
Mainly including precision filter, membrane case, RO membrane, high-pressure pump, flow meter, pressure meter, distribution box, control valve and others
Reverse Osmosis ( RO ) Water Treatment Plant, Ultrafiltration Water System,Brackish Water Purification System,Water Filter System,Water treatment Equipment,Water Desalination System,Water Purifying Solutions.
Reverse Osmosis water treatment machine/ Water Treatment Plant:
Multi-stage media filtration for pre-treatment, and RO unit for main filtration, polishing treatment of UV system and Ozone system.
| Model No. | Capacity (M3/H) | Power (kw) | Recovery Rate (%) | Total land area L* W *H (mm) |
| RO-250 | 0.25 | 1.5 | 50 | 2500*1000*2800 |
| RO-500 | 0.5 | 1.5 | 50 | 2500*1000*2800 |
| RO-1000 | 1 | 2 | 50 | 3500*1200*2800 |
| RO-2000 | 2 | 4 | 50-60 | 6500*1500*2800 |
| RO-3000 | 3 | 4.5 | 55-65 | 7500*1500*2800 |
| RO-4000 | 4 | 6.5 | 55-65 | 7500*1500*2800 |
| RO-5000 | 5 | 11 | 60-70 | 10000*2500*3500 |
| RO-6000 | 6 | 11 | 60-70 | 10000*2500*3500 |
| RO-8000 | 8 | 18 | 60-70 | 10000*3500*3500 |
| RO-10000 | 10 | 20 | 60-70 | 10000*4000*3800 |
| RO-20000 | 20 | 30 | 70-75 | 15000*5000*5000 |
| RO-30000 | 30 | 40 | 70-75 | 20000*6000*5000 |
| RO-50000 | 50 | 50 | 70-75 | 30000*8000*5000 |
Pre-treatment System
Mainly including raw water pump, quartz sand filter, activated carbon filter, resin filter, antiscale tank, high & low pressure protection switch, raw water pressure meter.
Solve the following problems mainly:
A. Prevent membrane scaling(including Fe3+,Fe2+,CaCO3,CaCO4,SrSO4,CaF2,SiO2,iron,aluminum oxide)
B. Prevent colloidal material and suspended solids particles polluting and blocking.
C. Prevent organic polluting and blocking.
D. Prevent microbial polluting and blocking.
E. Prevent destruction of RO membrane due to oxidation substances.
F. Maintain the stability of water output.
1).Multi-media filter
The multi-media filter is widely used in drinking water treatment to remove different types of particles, such as suspended solids (turbidity), colloidal compounds and etc, ensuring the filtered water's TDS is less than 5. This process will reduce the load on the back-end fine filters.
Diffuser
There is diffuser, installed in the filter. Their main function is to make the compressed air and the water distribute evenly during backwash and water distribution.
2) Active carbon filter
The active carbon filter is the key device, commonly used for removal of organic substance and heavy metal element, suspended solids, residual chlorine and etc. It can effectively reduce the level of COD and improve the taste of water. The system is a pressure filter. In the filter, the quartz and Coconut shell activecarbon bed are employed. The activated carbon is equipped with vent valving at the highest point and adrain connection at the lowest point. The internal systems and components for each tank is constructed of frp material.
3) Security filter ( Cartridge Filters)
The security filter is most commonly used for treat water. The whole system adopts one set of stainless filter. There are 5 pieces of polypropylene in every 5μ Filter cartridges, filtering the vast majority of particles in the water, which eases the load of RO membrane. This process of filtration benefits to the filter cartridge and prolongs its lifetime in the system.
This apparatus contains filtration component and stainless support layers. The support layer is made of stainless steel 304, with the advantages of compact structure, beautiful shape, high flux, good filtration accuracy and etc. This apparatus is fitted with air drain valve and bottom air drain valve and side drain valve.
4) Reverse Osmosis Modules( RO)
RO system is key part for the water treatment system, which is widely used to make the pure water and drinking water. RO membrane removes many types of large molecules and ions from solutions by applying pressure to the solution when it is on one side of a selective membrane. The result is that the solute such as iron, Virus, bacteria and solids is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side.
5) Piping, Valves & Fittings
The pipe, valves and fittings (including tubing) ball valves, butterfly valves, piping used to the system is SS304. Reverse Osmosis Modules is equipped with sample valve for the convenience to check the product water.
6) Control devices
The whole automatic production line is achieved through the converter and PLC programmer and data collector such as the liquid lever sensor, flow sensor and etc. The whole production line is monitored by remote computer. When the water level of the product water tank is high, the system will stop automatically. When the water level of the product water tank is low, the system will run automatically.
Washing-filling-capping 3-in-1 unit filling machine
pet washing/filling/capping 3-in-1 unnit machine. Whole machine clamp bottle bottle neck transport, steadily conveyor reliable, deduce machine stop failure, just need exchange very few exchange parts, can apply to multi-kind bottle type productyion requirement, ecliminate to abrasion to bottle body, steadily transport. Filling method is micro grative type filling, en-heighten filling speed, filling precision and production capacity. Capping method adopt to France import that is catch cap, then capping. It is special for pure water filling, whole fracture is new design, strong application, safe reliable manipulation, high auto degree.
Summary
(1) This Mineral Water Bottling Plant is mainly used for washing, filling and capping PET bottle which can fill non- carbonated drinks such as mineral water, pure water, wine and so on.
(2) Bottle washing, filling and capping are achieved in one machine.
(3) The contact time is shorten between material and the outside. And improved the health conditions, production capacity and economic benefits.
(4) CGF series Mineral Water Bottling Plant adopts hanging type conveying-bottle structure to make changing bottle mold more convenient, faster and more laborsaving.
(5) The main machine adopts advanced PLC control technology. The key electric elements adopt Mitsubishi, Omron, Siemens, etc international famous products.
Parameter:
| Model (CGFB) | 16-12-6 | 18-18-6 | 24-24-8 | 32-32-10 | 40-40-12 | 50-50-15 |
| Washing head | 16 | 18 | 24 | 32 | 40 | 50 |
| Filling head | 12 | 18 | 24 | 32 | 40 | 50 |
| Capping head | 6 | 6 | 8 | 10 | 12 | 15 |
| Capacity(500ml) | 4000BPH | 6000BPH | 1000BPH | 1200BPH | 16000BPH | 24000BPH |
| Power | 3.8kw | 4.3kw | 6.5kw | 8.7kw | 9.5kw | 12kw |
| Overall size L*W*H | 3050*2000*2400mm | 3170*2070*2400mm | 4070*2350*2400mm | 5100*2600*2400mm | 6250*3050*2400mm | 7500*3900*2400mm |
Summary
(1) This Mineral Water Bottling Plant is mainly used for washing, filling and capping PET bottle which can fill non- carbonated drinks such as mineral water, pure water, wine and so on.
(2) Bottle washing, filling and capping are achieved in one machine.
(3) The contact time is shorten between material and the outside. And improved the health conditions, production capacity and economic benefits.
(4) CGF series Mineral Water Bottling Plant adopts hanging type conveying-bottle structure to make changing bottle mold more convenient, faster and more laborsaving.
(5) The main machine adopts advanced PLC control technology. The key electric elements adopt Mitsubishi, Omron, Siemens, etc international famous products.
| Model (CGFB) | 16-12-6 | 18-18-6 | 24-24-8 | 32-32-10 | 40-40-12 | 50-50-15 |
| Washing head | 16 | 18 | 24 | 32 | 40 | 50 |
| Filling head | 12 | 18 | 24 | 32 | 40 | 50 |
| Capping head | 6 | 6 | 8 | 10 | 12 | 15 |
| Capacity(500ml) | 4000BPH | 6000BPH | 1000BPH | 1200BPH | 16000BPH | 24000BPH |
| Power | 3.8kw | 4.3kw | 6.5kw | 8.7kw | 9.5kw | 12kw |
| Overall size L*W*H | 3050*2000*2400mm | 3170*2070*2400mm | 4070*2350*2400mm | 5100*2600*2400mm | 6250*3050*2400mm | 7500*3900*2400mm |
Our workshop
After sale service
1. Welcome to consult us for offer and technical solution:
2. free design workshop layout as workshop space.
3. free check raw material quality report to match suit water treatment system.
4. Engineer install and train client how to use and maintain machine
5. one year guarantee
6. if some client urgently need machine, we can ship machine half month under supply caps and bottle samples to meet with client quick need.
Some basic details need buyer support:
1. bottle and cap samples
2. workshop space length and width size
3. source water quality report
4. capacity requirement, we will match solution as it. we have capacity from 1000bph to 24000bph
5. and other details need check
6. for more,can talk us 86-13739169728
We also supply Raw material required for filling line required:
preform&cap &label&PE film